The Surly Kid Corral is just that: A Corral where you can store your kids when they’re riding on the deck of your Big Easy, Big Dummy, or Big Fat Dummy. Designed to be semi-modular, the corral offers up different configurations to fit your unique human-corralling needs. As your family grows in size or number, you can adjust the Kid Corral to give your tiny humans more or less freedom. The Kid Corral Kit comes equipped with a full safety rail system, two soft Deck Pads, and a Deck Bar comfortable enough for tiny paws. As an added bonus, the Kid Corral system is tested and compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions. - Semi-modular system is designed to easily add or remove sections of the corral rails to fit your passenger safety needs - Kit includes the full safety rail system, two soft Deck Pads, Deck Bar and required mounting hardware - The Kid Corral system is also compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
$25.19 - $27.99
Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.
•Uses one 9v battery (not included) •Fits most handlebars
Stickers/Decals for repairing or repainting your Surly Straggler - Headbadge included
TYR's Burner EBP Fins are a great training tool for building strength while maintaining a high cadence kick. The ultra-soft, high-buoyancy rubber helps elevate your lower body to maintain proper position. There's even a Wall Gripper Footpad so you can push off from the wall with confidence.
Frame Stickers/Decals and a headbadge for repairing or repainting your Surly Cross Check.
$7.99 - $9.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 32mm wide x 222mm long - 3 extenders included for desired protection
Pop this replacement headbadge on your Surly and it's good as new.
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be separated and installed directly to bottle cage mounts on frame - Includes seatpost adaptor and bottle cage bolts - Bottle cage and cartridges sold separately
- Show support for your favorite brand with the Whisky Get Fancy patch. - Perfect to apply onto your hat, bag, or jersey
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
Stickers/Decals for repairing or repainting your Surly Pack Rat. - Includes headbadge
The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches
Featuring All-city's pup mascot Baroo and celebrating all four-legged trail buddies! These are made in the USA by Falls Creek Outfitters and are perfect for your backpack, jean vest, or frame packs. - Size: 2 x 2.5-inches
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
Show your love for bicycles, tools and all things Park Tool with their Coffee Mug. Perfect for impressing your guests with a cool-logo cup, or fueling yourself before a fun wrenching session, a few of these mugs should be in every kitchen cabinet and bicycle workshop, too!
- EverClear is an 8-micrometer (µm) high-quality frame protection film - Each sheet is 2-feet x 8-inches. - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply; simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 8µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA
- Tough lightweight injection molded plastic - Adjustable to fit 20 inch or larger wheel
Surly Moonlander Decals are for putting on your bike. Then you go float some trail. - 100% sweet - Dry transfer style - Decals for both frame and fork - Includes headbadge
• Rear mount • Fits 26" wheels
$19.99 - $44.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
Electra's motorcycle-inspired Genuine Leather Streamers add road warrior style to any ride. Simply slip these stylish streamers into the end of your grips and set out on the open road.
An adjustable, rear integrated kickstand that supports bikes of all sizes, from 24" to 29" wheels. Adjustable length fits more bikes Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. - Adjustable length fits bikes with 24-29-inch wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Will not interfere with pedaling - Super strong and stable platform will hold your bike upright even with gear on the rack
$8.99 - $10.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Page 1 of 4 Next page